Leave feedback on the product
Filament Glitter PLA Spectrum 1.75mm Stardust Blue 0.5kg
- - not abrasive
- - improved hardness and compression resistance as compared to PLA without admixtures
- - user friendly
- - high-gloss surfaces, which reduces the visibility of layers on the side face of the printed items
- - no shrinkage after cooling
- - the possibility to obtain a perfect side surface
- - easy to print
Product code: 5903175651600
Ask about the product
Administratorem danych osobowych jest Zadar. Przetwarzamy je w celu przesłania odpowiedzi na zapytanie. Więcej informacji dotyczących przetwarzania danych osobowych znajduje się w polityce prywatności.
Share the product card
Cechy produktu
Filaments 1
Opis
About Glitter PLA
Glitter PLA is a highly aesthetical material blended with high-glitter particles. The particle content in the filament increases the hardness and compression resistance of printed items. These properties are improved at the cost of the higher brittleness of items. There is a possibility to control the gloss level by increasing/decreasing the wall thickness. Due to the content of infusible particles, it is necessary to use printing nozzles with diameters of 0.4mm or more.
Applications
- interior design articles
- advertising materials
- educational projects
- any areas where it is essential to present specific geometric figures in an eye-catching manner
Packaging
Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Whole product packed in the original, folied Spectrum Filaments packaging.
Product documentation
Technical Data Sheet: TDS
Material Safety Data Sheet: MSDS
Glitter PLA - properties and general data
| General information | |
|---|---|
| Diameter | 1.75mm |
| Dimensional tolerance | ±0.05mm |
| Nozzle temperature | from 185°C to 215°C |
| Bed temperature | from 0°C to 45°C |
| Recommended printing speed | from 40mm/s to 90mm/s |
| Recommended shell thickness | from 0.40mm to 2.70mm |
| Recommended layer height | from 0.05mm to 0.30mm |
| Cooling | up to 100% |
| Closed chamber for printing | not necessary |
| Dry box recommended | no |
| Ruby or hardened nozzle recommended | no |
| Adhesive | not necessary (for increased adhesion or to prevent warping: Dimafix, 3DLac, Magigoo) |
| Physical and termal properties of raw material | |
| Specific Gravity | 1.24g/cc |
| MFR (210°C / 2.16kg), g/10 min | 6 (D1238) |
| Heat Distortion Temperature | 55°C |
| Tensile Strength at Break | 53MPa (ASTM D882) |
| Tensile Yield Strength | 60MPa (ASTM D882) |
| Tensile Modulus | 3.5MPa (ASTM D882) |
| Impact resistance | 16J/m (ASTM D256) |
Opinie
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Bestsellery
-
Price 59,00 zł
-
Price 74,90 zł
Potrzebujesz pomocy?
Przejdź do bloga.
Porozmawiaj z naszym zespołem obsługi klienta. Od poniedziałku do piątku od 9:00 do 19:00.
